Best Seller

Fiber Media Converter - UTP to 100Base-FX - LC Multimode, 2km, 1300/1310nm

Q: What data rate does this Fast Ethernet media converter support?

This media converter supports 10/100Mbps (Fast Ethernet) with auto-negotiation on the copper RJ-45 port and 100Mbps on the fiber optic port.

Q: Does this media converter require multimode fiber?

Yes. This media converter is designed for use with multimode fiber (50/125 or 62.5/125 micron). It is not compatible with singlemode fiber. Multimode fiber is typically used for shorter-distance runs within a building or campus environment.

Q: What is the maximum transmission distance of this Fast Ethernet multimode media converter?

This media converter supports a maximum transmission distance of 2km over multimode fiber.

Q: What wavelength does this 1310nm Fast Ethernet multimode media converter use?

This media converter operates at a wavelength of 1310nm over multimode fiber.

Q: Does this media converter use an LC fiber connector?

Yes. This media converter features an LC fiber optic port . LC connectors use a compact push-pull locking mechanism and are the most common fiber connector type in modern data center and enterprise networking environments. An LC fiber patch cable is required to connect this unit to your fiber infrastructure.

$54.46

Qty:

This Fiber Transceiver / Media Converter converts data signal between 10/100Base-T/TX and 100Base-FX Fast Ethernet. Supports 50/125, 62.5/125, or 100/140 micron multimode Duplex LC fiber. Optical wavelength 1300/1310nm, Maximum distance up to 2km.

Write a Review

Manufacturer: Networx®

Availability: In stock

SKU: FT-100MM-LC

GTIN: 00845425008220

This product supports IEEE802.3UI 100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. The transmission media adopts Cat5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire (10/100M).

In conformity to IEEE 802.3 10 Base-T standard and IEEE 802.3u 100 Base-Tx/Fx. Max. 2M buffer memory built in chip. Back pressure flow control for full duplex IEEE802.3 X and half duplex. Automatic identification of MDI/MDI-X cross line. High performance 1.4Gpbs memory bandwidth. In conformity to safety code of FCC and 15 CLASS A and CE MARK.

Standard Protocol - IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/FX
Connectors - One UTP RJ45, Two LC Fiber
Operation mode - Full Duplex or Half Duplex
Power Supply - External AC-DC Power Adapter, US Standard
Fiber (micron) - 50/125, 62.5/125, or 100/140
Optical wavelength - 1310 nm
Transmission Distance - 2km
Optical Output Power - > -18 dBm
Receiving Sensitivity - < -31 dBm

Products specifications

Manufacturer	Networx®
Color	Gray
Connector A	LC Female
Connector B	RJ-45 Female
Fiber Type	Multimode
Wavelength	1310nm
Maximum Transfer Distance	2km
Maximum Data Transfer Rate	10/100 Megabit per second
RoHS Compliant	Yes
Warranty	3 Year Warranty
SKU	FT-100MM-LC
GTIN	00845425008220
Weight (Lbs)	0.88

Frequently asked questions

What data rate does this Fast Ethernet media converter support?

This media converter supports 10/100Mbps (Fast Ethernet) with auto-negotiation on the copper RJ-45 port and 100Mbps on the fiber optic port.

Was this helpful?

Does this media converter require multimode fiber?

Yes. This media converter is designed for use with multimode fiber (50/125 or 62.5/125 micron). It is not compatible with singlemode fiber. Multimode fiber is typically used for shorter-distance runs within a building or campus environment.

Was this helpful?

What is the maximum transmission distance of this Fast Ethernet multimode media converter?

This media converter supports a maximum transmission distance of 2km over multimode fiber.

Was this helpful?

What wavelength does this 1310nm Fast Ethernet multimode media converter use?

This media converter operates at a wavelength of 1310nm over multimode fiber.

Was this helpful?

Does this media converter use an LC fiber connector?

Yes. This media converter features an LC fiber optic port. LC connectors use a compact push-pull locking mechanism and are the most common fiber connector type in modern data center and enterprise networking environments. An LC fiber patch cable is required to connect this unit to your fiber infrastructure.

Was this helpful?

Your Privacy Choices